Well decided it was high time to get on with some of the build, Firstly the new oil pump was fitted;
Old;
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-14134232-1.jpg)
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-14134248-1.jpg)
New;
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-19165042-1.jpg)
Fitted all the front crank seals, plate, sump and rocker cover.
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25165415.jpg)
Cleaned up the dizzy;
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-24150404.jpg)
Started on the Inlet manifold;
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25133451.jpg)
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25133547.jpg)
Stripped it, cleaned, rubbed down and masked up. Then put on gas mark 5 !! haha
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25145427.jpg)
Tested my crackle paint skills on the bottom of the manifold
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25150119.jpg)
Dismantled the loom from the fuel rail and cleaned it.
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25155239.jpg)
Once I had done the top side of the inlet manifold/Swedish plenum I fitted it
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25170304.jpg)
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25170317.jpg)
Then got my nice clean injectors/fuel rail back on.
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25173021.jpg)
![Image](http://i263.photobucket.com/albums/ii133/cutch999/Cossie/2011-07-25173154.jpg)
Tomorrow the other side!